Pressure Washing Tips and Suggestions
June 28, 2008 by admin
Filed under Pressure Washing Tips
Using a pressure washer can be a time and energy saving way of cleaning most hard surfaces. Using a pressure washer to clean your home has become increasingly popular over the past decade, however the quality of the pressure washer you use will have a large impact on whether you will do it again or not. A commercial quality pressure washer is what I would recommend hands down. It makes the job of Pressure Washing your home easy and they last 5 - 10 times longer than a non commercial type. By spending a little more up front you can save yourself thousands in the long run. Here are some tips that will help you maintain your pressure washer and prevent damage to you and the surface.
Current info about Pressure Washing Tips is not always the easiest thing to locate. Fortunately, this report includes the latest Pressure Washing Tips info available.
When using chemicals always follow the manufacturer directions. Never run bleach or any type of acid through your chemical injectors. When switching to your chemical tip always check to see that your O - ring is seated properly before inserting the tip. If the O - ring is in a bind or missing, chemicals may be able to spray back towards your face. Always where eye protection when applying chemical or pressure washing.
To understand the amount of power needed for any given job, stand away from the surface six feet, pull the trigger, and slowly walk towards the surface you are cleaning. Once you see the desired effect taking place that is the range you will want to work from. This simple step will give you a reference point for proper cleaning and will prevent damage to the cleaning surface.
Think about what you’ve read so far. Does it reinforce what you already know about Pressure Washing Tips? Or was there something completely new? What about the remaining paragraphs?
You will want to perform routine maintenance on your power washer to prolong its life. Change your engine oil every 50 hours with the recommended oil for your machine. Change your pump oil every 100 hours with a NON - DETERGENT oil as recommended by the pump manufacture.
When using a hose reel to extend the life of the reel unroll of the hose. By doing this you relieve the pressure from the core of the reel. On a hot water machine you will not only relieve pressure but also eliminate heat build up on the reel and your hose.
Bleach can be a great cleaner, however you should never use bleach on wood, shingle roofs, or around delicate landscaping.
If you are planning on pressure washing greasy or oily areas you should unquestionably use a hot water machine. The heat will emulsify the oil allowing the water volume to carry it away. With a cold water machine oil will actually thicken and stick to the surface even worse. For normal dirt a cold water machine works fine.
Adding a hot box to an existing cold water pressure washer is a great economical way of creating a hot water pressure washer, and installation is simple.
If you own a shop and don’t plan on moving your pressure washer an electric model can save you time and money on energy costs. You never have to add fuel, and running an electric machine is cheaper.
So now you know a little bit about Pressure Washing Tips. Even if you don’t know everything, you’ve done something worthwhile: you’ve expanded your knowledge.


Comments
Tell us what you're thinking...
You must be logged in to post a comment.