Pressure Washing A Home Exterior

There is no place like home, home sweet home, do these slogans sound familiar?

The more you understand about any subject, the more interesting it becomes. As you read this article you’ll find that the subject of Pressure Washing a House is certainly no exception.

Everyone imagines the perfect house for them, but what they never imagine is how dirty those houses can become. Homes are built of many different materials, from brick to vinyl siding, but what ever your home is made of you can always count on a pressure washer to bring back that pristine look you saw in the past. For a home exterior you will want a pressure washer with these features: pressure adjustable, light to medium duty, gas pressure washer.

For vinyl or wood siding you won’t need as much pressure as most other building materials may require. Between 1000 and 2000 PSI is adequate. For stucco 1500 - 2500 PSI is great. You will want to be cautious of loose, cracked, or hollow spots in your stucco, as these problem areas cannot handle a high pressure washing. Other products such as synthetic or artistic building materials will come with a manufactures recommendation for pressure washer cleaning. For brick it is recommended by most manufactures to use between 500 - 1200PSI. Bricks can be easily damaged with a bit much pressure. For driveways you may want to try a Surface Cleaner.

When pressure washing your home try a general house wash.

Truthfully, the only difference between you and Pressure Washing a House experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Pressure Washing a House.

It will clean just about all dirt and debris on nearly all surfaces. Never use bleach or acid products through the chemical injector, or any part of your pressure washer, these chemicals should be applied with an external pump up bug sprayer. Before you start to pressure washer your house make sure all windows are shut, and note any problem areas that may not be able to handle a high pressure stream before you find them with the pressure washer. Never pressure wash windows, not only can you break them, you may even void the manufacturer warranty.

Begin by connecting your pressure washer to the appropriate water supply, and then turn on your pressure washer. Standing six feet from the surface, using your 25° Spray tip, pull the trigger and walk towards the surface until you reach your desired effect. For pressure washing high areas never use a ladder, as the pressure can knock you off balance causing severe injury. For reaching high areas you can use an extension wand or a telescoping wand both of which can have multiple purposes, from assisting in gutter cleaning to rinsing second story windows at low pressure. Be sure to read all directions before using any chemicals to make sure that they won’t harm your landscaping, paint or other surfaces.

Now you can understand why there’s a growing interest in Pressure Washing a House. When people start looking for more information about Pressure Washing a House, you’ll be in a position to meet their needs.