Pressure Washing a Driveway

The entrance way of your home should be as inviting as your home itself. As you drive you will collect all sorts of unmentionable road debris, depositing it onto your driveway. Your kids may play here and you will certainly track this scum right into your home. Instead of spending hours with a broom and hose try a pressure washer. A pressure washer could easily save you hours of scrubbing and your back. Using a chemical can also reduce the amount of time you spend caring for your driveway.

The following article presents the very latest information on Pressure Washing a Driveway. If you have a particular interest in Pressure Washing a Driveway, then this informative article is required reading.

Concrete driveways will require the most PSI with a recommended minimum off 2400 PSI. The water volume GPM is also an important factor to carry the loose dirt away. Keep in mind a larger pressure washer with more PSI and GPM will significantly shorten the time it takes to clean your driveway. Asphalt and other driveway surfaces may require less pressure than concrete. You may want to test the pressure in an inconspicuous area prior to completing your entire driveway.

Those of you not familiar with the latest on Pressure Washing a Driveway now have at least a basic understanding. But there’s more to come.

Start by removing cars, toys, and anything else that may get in your way. You can pretreat oil stained areas with concrete cleaner, being sure to follow all directions. The most effective spray tip will be your 15° tip giving effective impact. Connect your pressure washer to the appropriate water supply and then turn your pressure washer on. Start pressure washing at the highest point of your driveway, which will usually be next to your house or garage, this will allow dirty water to flow away from the house. Using overlapping strokes continue down your drive way until you have removed all of the build up. Certain areas may require more time than others depending on the amount of buildup. Give your driveway a final rinse and allow to dry 24 - 48 hours before applying any sealers or paint.

As your knowledge about Pressure Washing a Driveway continues to grow, you will begin to see how Pressure Washing a Driveway fits into the overall scheme of things. Knowing how something relates to the rest of the world is important too.