How to Pressure Wash a Pool Deck

So what is Pressure Washing a Pool Deck really all about? The following report includes some fascinating information about Pressure Washing a Pool Deck.

Your pool deck is covered in mold, algae, and something you can’t even distinguish from the party last week. Sound familiar. Well don’t worry, with the right pressure washer (2000 psi and 3 gpm or higher) you’ll spend little time cleaning it up, and can get back to enjoying your pool.

Mold and algae not only look bad, they are extremely slippery as well. Bleach will remove mold and algae well, however never put any type of bleach or acid through your pressure washer. It is best to apply these types of chemicals with a pump up garden sprayer.

You will want to remove all items from your pool deck, toys, furniture, etc, that way you won’t damage anything. Connect your pressure washer to the appropriate water supply.

You’ll also want to remove any objects such as leaves, coins, or anything that might slow you down. You can accomplish this by simply holding your pressure washer wand straight out and blowing away the debris.

Next apply the right Chemical, like Concrete Cleaner to your pool deck, depending on what you are trying to get off and what type of material it is made of, being sure to follow all directions. You will want to use either a 15° or 25° spray tip holding your wand at a 90° angle to the pool deck. Depending on the material to be cleaned a pressure washer with between 2000 - 3500 psi and at least 3 gallons per minute ( gpm ) are required to accomplish this job quickly and efficiently.

Sometimes it’s tough to sort out all the details related to pressure washing, but I’m positive you’ll have no trouble making sense of the information presented above.